A universally applicable wafer type valve manufactured acc. to EN 593.A wide range of standard materials offers the use in various applications.

A unique valve series with integrated thermometer for media temperature control.

A resilient seated valve designed for gas applications.Certified by DVGW .

Resilient seated butterfly valve especially designed for water applications. Certified by DVGW.

A universally applicable butterfly valve with vulcanised liner according to EN 593. Available as wafer- and lug type version.

A light weighted wafer type valve to be used in public swimming pools.

A lug type butterfly valve for end of line applications.

A unique valve series with integrated thermometer for media temperature control.

A lug type butterfly valve for end of line applications.

A lug type butterfly valve for end of line applications.

A universally applicable butterfly valve with vulcanised liner according to EN 593. Available as wafer- and lug type version.

The special liner of this wafer type valve is suitable for applications with abrasive media.

A double flanged valve with vulcanised liner suited for haevy duty services such as shipbuilding and wastewater plants.

A double flanged valve suited for heavy duty services such as shipbuilding and wastewater plants.

A double flanged valve in short construction designed for heavy duty services.

A double flanged valve in short construction designed for haevy duty services.

The reduced inner diameter of this wafer type valve is suited to be installed in PE/PP piping systems.

The reduced inner diameter of this lug type valve is suited to be installed in PE/PP piping systems.

Wafer type valve with 2-piece body and disc and shaft in one piece.

Lug type valve with splitted body and disc and shaft in one piece.

Wafer type butterfly valve for shut-off and control services in the chemical industry.

Lug type butterfly valve for shut-off and control services in the chemical industry.

Valve with split stainless steel body for use in the food and beverage industry.

Valve with split stainless steel body for use in the food and beverage industry.

Butterfly valve with centre flange enables the one side lugging of the pipe. Due to the diversity of base materials available, this valve is suitable for various fields of application.

The full flange design of this valve series provides spaceless sealing with the counterflanges, so objectionable scaling is avoided.

A light weighted wafer type valve is especially designed for water treatment plants in public swimming pools.

Resilient seated double flanged butterfly valve for semi-corrosive media with split body.

PTFE-lined wafer type valve for chemicals and high-corrosive media.

Double flanged PTFE-lined butterfly valve for Shut-off and Control Services in the chemical industry.

PTFE-lined lug type valve for chemicals and high-corrosive media.

PTFE-lined wafer type valve for toxic and highly corrosive media.Specially designed for the chemical industries.

PTFE-lined lug type valve for toxic and highly corrosive media.Specially designed for the chemical industries.

The butterfly valve type H011 combines the advantages of a chemical valve and the properties of a disc valve for hygienic requirements.

A high-performance wafer type valve suitable for high pressure and high temperature applications.

A high-performance lug type valve suitable for high pressure and high temperature applications.

High-performance wafer type valve with two piece shaft and ANSI 150 Pressure/Temperature rating.

High-performance lug type valve with 2-piece shaft and ANSI 150 Pressure/Temperature rating.

High Performance Valve for the chemical industry.

Double-flanged butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions.

Lug type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions.

The scotch-yoke principle in the EB actuators exactly matches the valve torque characteristics,thus reducing size and air consumption.

The scotch-yoke principle in the EB actuators exactly matches the valve torque characteristics,thus reducing size and air consumption.

This series of linear pneumatic actuators is designed to automate knife gate valves. Available in 6 sizes and different stroke lenghts.

A compact series of actuators for open/close and control functions.

Electric quarter turn actuators series E 65 - E 210 with modularsystem are designed to automate control valves.

A valve series especially designed to be used with silos and containers.

A valve Series especially designed to be used with silos and containers.

These valves are designed to be used with tankers silos and road vehicles.

These valves are designed to be used with tankers, silos and road vehicles.

A butterfly valve designed with both ends suitable for clamping rings.

Q011 double seat valves are designed for isolation/control in high purity air applications.

A pinch valve to be used in bulk loaded wastewater or slurries.

A plastic valve with socket ends for low pressure applications in plastic pipes.

The impeller valve series FS is designed for a safe and consistent discharge of rapid flowing products in the bulk industry.

The series TW-M provides a light metal body with a stainless steel insert ring instead of an elastomer seat. Due to its special design a jamming of the media e.g.granulates is avoided. The valve closes properly.

The metallic sealing version (CK-M) has an airspace between disc and body. This series is highly suited to control airflows and aspiration services.

EBRO cycle-locks are installed where powdered media is discharged from silos, receiver tanks and bigbags and dosed in many cases. They are also used for feeding into downstream production processes, as well as for inertisation of products during transfer operations.

The sealing system was developed for use with highly abrasive or very sensitive media.Available for all resilient seated butterfly valves with replaceable liner.

A wafer type process valve with a vibrator mounted on the lower shaft. The disc is set into linear vibrations before opening to keep the product in motion thus reducing compression. The frequency is controlled via air pressure.

These valves are all bi-directional and can therefore be installed into pipe systems independent of pressure direction. Full bore and excellent flow characteristics makes them suitable for fluids, sludge and liquids with solids in suspensions such as water, sewage and bio mass.

These valves are all bi-directional and can therefore be installed into pipe systems independent of pressure direction. Full bore and excellent flow characteristics makes them suitable for fluids, sludge and liquids with solids in suspensions such as water, sewage and bio mass.

These valves are all bi-directional and can therefore be installed into pipe systems independent of pressure direction. Full bore and excellent flow characteristics makes them suitable for fluids, sludge and liquids with solids in suspensions such as water, sewage and bio mass.

Stafsjö’s WB14E knife gate valve is a high performance shut-off valve with superior flow characteristics, offering bi-directional zero leakage shut-off up to 150 psi/10 bar. It is suitable for media such as pulp stock, chemicals, sludge, bio mass, slurry and water. The fully lugged body design is suitable for dead-end services.

Stafsjö’s knife gate valve MV is used within many different fields of applications. The valve has a gate with a bevel edge that effectively cuts through different media. In closed position the gate is pushed onto the seat which gives a tight and reliable sealing. This special shut-off technique makes the MV valve suitable for both fluids and dry media such as pulp, sludge, biomass, powder and different kinds of waste.

Stafsjö’s knife gate valve XV gives a secure and tight shut-off, independent of pressure direction. The valve has good flow characteristics and can be used in applications with pulp, biomass and sludge, and the Polyurethane seated version further extend its field of applications to abrasive media.

Stafsjö’s knife gate valves HG have excellent flow characteristics and gives a bi-directional tight sealing. 

Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.

Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.

Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.

Stafsjö’s knife gate valve RKO is reliable and particularly well suited for demanding reject and other abrasive media. The valve’s circular inlet and square outlet together with the gate, that has a rectangular shape and a bevel edge, counteracts clogging and blockages, which often is a problem in combination with junk traps, coarse reject and cleaners.

This complete Junk Trap is designed for really tough process conditions handling difficult and abrasive media. The JT is specially designed to minimize turbulence, erosive wear, and build-up of solids and reject material.

Stafsjö’s knife gate valve D2G is a bi-directional tight valve with full bore. The valve is equipped with two hard chromed gates that works towards each other in the bore, which gives an extremely fast operation. This shut-off performance along with its flow characteristics makes it suitable for contaminated media or reject handling. The valve should be mounted only in a vertical pipe line.

Stafsjö’s knife gate valves SLV and SLF are particularly suitable for abrasive and demanding slurry where operation reliability and low life cycle cost are emphasized. The SLV is a lugged version while the SLF is fully flanged and especially suitable on old non-centred pipes or low pressure applications.

Stafsjö’s knife gate valves SLV and SLF are particularly suitable for abrasive and demanding slurry where operation reliability and low life cycle cost are emphasized. The SLV is a lugged version while the SLF is fully flanged and especially suitable on old non-centred pipes or low pressure applications.

Stafsjö’s knife gate valves SLH and SLX are designed for the most demanding high pressure applications with slurry and other abrasive media where operation reliability and low life cycle cost are emphasized. The SLH is designed for pressure up 20 bar/290 psi while the SLX is designed for 50 bar/720 psi.

Stafsjö’s knife gate valve TV is used as an isolation valve for a transmitter or sensor on a tank for which a short face-to-face length is required.

A universally applicable check valve for horizontal and vertical installation.

A double check valve for industrial plants and civil engineering.

The electro-pneumatic positioner EP3 is used to control singleacting and double-acting pneumatic actuators and is compatible with all EBRO valves for on/off and control applications.

IO-Link Smart Box Unit, compatible with all EBRO valves. End position monitoring and diagnosis via IO-Link or conventional.

The new switch box generation SBU (Switch Box Unit) is designed to be directly mounted on our pneumatic actuators (acc. to VDI/VDE 3845. EB4.1 - EB12.1). By means of the compact design error sources and the construction volume are reduced.

The analog positioner EP 100 with input signal 4..20 mA serves to activate single or double acting pneumatic quarter turn actuators.The settings are carried out in a simple way via switches and potentiometers. In the version EP100-Option R it achieves the option travel indication.Position of the actuator is shown by an analog 4..20 mA signal.

The positioner EP 200 is controlled by micro processor and is designed to operate and control single or double acting pneumaticactuators by means of an analog signal of 4-20 mA. It providesthe advanced functionality of latest positioners, e.g. Autostart for thedetermination of control parameters and easy operation on site.

Compact positioner for assembly with rotary and linear actuators with digital display.

This 3-piece ball valve offers versatility, robustness and easy maintenance. The V-3MH is ideal for safe isolation of pure, neutral or agressive liquids, gases or vapors.