A universally applicable wafer type valve manufactured acc. to EN 593.A wide range of standard materials offers the use in various applications.

A lug type butterfly valve for end of line applications.

A universally applicable butterfly valve with vulcanised liner according to EN 593. Available as wafer- and lug type version.

A high-performance wafer type valve suitable for high pressure and high temperature applications.

The scotch-yoke principle in the EB actuators exactly matches the valve torque characteristics,thus reducing size and air consumption.

This series of linear pneumatic actuators is designed to automate knife gate valves. Available in 6 sizes and different stroke lenghts.

These valves are all bi-directional and can therefore be installed into pipe systems independent of pressure direction. Full bore and excellent flow characteristics makes them suitable for fluids, sludge and liquids with solids in suspensions such as water, sewage and bio mass.

These valves are all bi-directional and can therefore be installed into pipe systems independent of pressure direction. Full bore and excellent flow characteristics makes them suitable for fluids, sludge and liquids with solids in suspensions such as water, sewage and bio mass.

Stafsjö’s WB14E knife gate valve is a high performance shut-off valve with superior flow characteristics, offering bi-directional zero leakage shut-off up to 150 psi/10 bar. It is suitable for media such as pulp stock, chemicals, sludge, bio mass, slurry and water. The fully lugged body design is suitable for dead-end services.

Stafsjö’s knife gate valve MV is used within many different fields of applications. The valve has a gate with a bevel edge that effectively cuts through different media. In closed position the gate is pushed onto the seat which gives a tight and reliable sealing. This special shut-off technique makes the MV valve suitable for both fluids and dry media such as pulp, sludge, biomass, powder and different kinds of waste.

Stafsjö’s knife gate valve XV gives a secure and tight shut-off, independent of pressure direction. The valve has good flow characteristics and can be used in applications with pulp, biomass and sludge, and the Polyurethane seated version further extend its field of applications to abrasive media.

Stafsjö’s knife gate valves HG have excellent flow characteristics and gives a bi-directional tight sealing. 

Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.

Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.

Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.

Stafsjö’s knife gate valve RKO is reliable and particularly well suited for demanding reject and other abrasive media. The valve’s circular inlet and square outlet together with the gate, that has a rectangular shape and a bevel edge, counteracts clogging and blockages, which often is a problem in combination with junk traps, coarse reject and cleaners.

This complete Junk Trap is designed for really tough process conditions handling difficult and abrasive media. The JT is specially designed to minimize turbulence, erosive wear, and build-up of solids and reject material.

Stafsjö’s knife gate valve D2G is a bi-directional tight valve with full bore. The valve is equipped with two hard chromed gates that works towards each other in the bore, which gives an extremely fast operation. This shut-off performance along with its flow characteristics makes it suitable for contaminated media or reject handling. The valve should be mounted only in a vertical pipe line.

Stafsjö’s knife gate valves SLV and SLF are particularly suitable for abrasive and demanding slurry where operation reliability and low life cycle cost are emphasized. The SLV is a lugged version while the SLF is fully flanged and especially suitable on old non-centred pipes or low pressure applications.

Stafsjö’s knife gate valves SLV and SLF are particularly suitable for abrasive and demanding slurry where operation reliability and low life cycle cost are emphasized. The SLV is a lugged version while the SLF is fully flanged and especially suitable on old non-centred pipes or low pressure applications.

Stafsjö’s knife gate valve TV is used as an isolation valve for a transmitter or sensor on a tank for which a short face-to-face length is required.

A universally applicable check valve for horizontal and vertical installation.

IO-Link Smart Box Unit, compatible with all EBRO valves. End position monitoring and diagnosis via IO-Link or conventional.

The new switch box generation SBU (Switch Box Unit) is designed to be directly mounted on our pneumatic actuators (acc. to VDI/VDE 3845. EB4.1 - EB12.1). By means of the compact design error sources and the construction volume are reduced.

This 3-piece ball valve offers versatility, robustness and easy maintenance. The V-3MH is ideal for safe isolation of pure, neutral or agressive liquids, gases or vapors.